In comparison to steel units, ball transfer units out of plastics are non-conductive, resistant to acid and lye, no lubrication, maintenance-free low friction, low weight (up to 70 % less), appropriate for vacuum or pressure, saltwater-proof, free of metallic components depending on selection of materials, transport of fragile goods such as glass, available use in explosive atmosphere and aseptic areas (e. g. medical technology), customized design possible.
Part No. | *Max. axial static load |
[N] | |
BTU508-PM-ES-PM | 45 |
BTU512-PM-ES-PM | 55 |
BTU515-PM-ES-PM | 70 |
BTU519-PM-ES-PM | 85 |
BTU522-PM-ES-PM | 100 |
BTU525-PM-ES-PM | 120 |
BTU530-PM-ES-PM | 150 |
BTU538-PM-ES-PM | 175 |
BTU545-PM-ES-PM | 200 |
BTU560-PM-ES-PM | 300 |
*Max. static load depending on selection of materials
Housing | Transfer balls | Support balls | ||||||
PM | POM | Standard materials -40/+90℃ | PM | POM | Standard materials -40/+90℃ | PM | POM | Non-magnetic and lightweight -40/+90℃ |
PK | PEEK | High-load & Anti-corrosion -100/+250℃ | ES | Stainless steel | High-load | ES | Stainless steel | Standard materials |
PT | PET | Medical radiation -40/+100℃ | ZO | Ceramic | High-load & Anti-corrosion -200/+400℃ | ZO | Ceramic | High-load&Anti-corrosion -200/+400℃ |
PS | PPS | High-load & Anti-corrosion -40/+200℃ | PK | PEEK | High-load & Anti-corrosion -100/+250℃ | PK | PEEK | High-load&Anti-corrosion -100/+250℃ |
PF | PVDF | Vacuum applications -50/+150℃ | GL | Glass | Lightweight and low cost -200/+400℃ | GL | Glass | Lightweight and low cost -200/+400℃ |
906
▊CSB-PRB® Plastic Ball Bearings Finder[V2.0] is based on the analysis and calculation of a large number of test data in CSB® laboratory. You can calculations material data by entering parameters such as bearing load, speed, and temperature, and finally output material adaptation data.
▊Because the system calculate and analyze based on lab data, it can't exactly meet the ractual use requirements absolutly. The system data verification has certain limitations; CSB® recommends that the bearing must be tested again to verify whether it meets the actual use requirements.
▊CSB-PRB® Plastic Ball Bearings Finder output data information is only for design reference, and can not be used as the final standard for determining the bearing material conformity, If you have any questions, please contact CSB® sales engineers.
PRB10 has good strength and wear resistance as a general plastic ball bearings, the operation noise very low because the self-lubrication of the material; These bearings perform well in an alkaline environment...
morePRB15 plastic ball bearings are with excellent strength and wear resistance. The dimensions of the bearings are remaining stable either in the humidity environment or in the water. It has good chemical resistance...
morePRB20 series of plastic ball bearings with low friction and low working temperature properties; these bearings are suitable for long-term operation in the acid-base alternate environment. The standard material of inner...
morePRB25 plastic ball bearings material is friction optimized wear resistance material with low friction and good fatigue resistance. It is suitable for the high speed operation. The material is alkali, acid and detergent...
morePRB30 plastic ball bearings has excellent mechanical strength and wear resistance, Max. operation temperature 250℃; These bearings has excellent corrosion resistance to almost all corrosive environment...
morePRB40 series of ceramic ball bearings can work under very high temperature and very low temperature. These bearings with high load and the best corrosion resistance; these bearings are good working under acid...
morePRTB10 has good strength and wear resistance as a generic plastic rolling bearings, the operation noise very low because the self-lubrication of the material; These bearings perform well in an alkaline environment...
more