● Clearance-free and preload design
● Adjustable fitting gap
● Standard material EPB13
● Maintenance-free
● Shock absorbing and no noise
CSB-CPB® clearance-free and reloaded plastic bearings can be preloaded in radius and axial directions after fitted in housing, Auto-adjustable the fitting gap with the preload design;The special design bearings can absorbed shock and noise.
CSB-CPB® clearance-free and reloaded plastic bearings is made from the professional wear resistance material CSB-EPB13 which provides good wear resistance and excellent elastic feature. CSB-EPB18 material is available for the preload plastic bearings.
CSB-CPB® clearance-free and reloaded plastic bearings easy to be pressed into the housing by low pressure.The recommended housing tolerance is H7 and axial tolerance is h9.
3494
▊CSB-EPB® Plastic Bearings Finder[V2.1] is based on the analysis and calculation of a large number of test data in CSB® laboratory. You can calculations material data by entering parameters such as bearing load, speed, and temperature, and finally output material adaptation data.
▊Because the system calculate and analyze based on lab data, it can't exactly meet the ractual use requirements absolutly. The system data verification has certain limitations; CSB® recommends that the bearing must be tested again to verify whether it meets the actual use requirements.
▊CSB-EPB® Plastic Bearings Finder output data information is only for design reference, and can not be used as the final standard for determining the bearing material conformity, If you have any questions, please contact CSB® sales engineers.
Medium | CPB bearings resistance |
Alcohol | Resistant |
Hydrocarbons | Resistant |
Greases. oils | Resistant |
Fuels | Resistant |
Diluted acids | Conditionally resistant |
Strong acids | Not resistant |
Diluted alkalis | Resistant |
Strong alkalis | Conditionally resistant |
Please select bearing material and medium...
▊CSB® bearing material chemical resistance data is a comparison test result of the CSB chemistry laboratory using laboratory specimens or similar chemicals at room temperature 23 ℃, without considering the impact of other temperatures and chemical medium mixtures on the chemical resistance of CSB® bearing materials ; Therefore, this data can only act as a reference. CSB® recommends that the chemical resistance of actual parts should be tested under application conditions and verify the suitability of the bearings.
CSB® plastic bearings are highly wear-resistant plastic bushings, flange bearings and thrust washers made of composite materials. The working temperature CSB-EPB® plastic bearings up to 250 °C...
moreThe self-lubricated bearing is developed specially for the metal plate fitting. It is made with the CSB-EPB3M material which is good at shock absorbtion and wear resistance...
moreThin-walled plastic bearing for quick installation. It is made with CSB-EPB3M material wich is flexible for dimension viriation. Alternative material CSB-EPB7 is also available for special wear resistance requirement.
moreSuitable for the application where the CSB® plastic clip bearing is hard to be located. The requirement of the fitting hole is not critical and the set screw could be secured without any risk of moving.
moreCSB® plastic wear resistance washer. Suitable for a fitting to the uncontrollable axial space in order to reduce the vabriation and noise during the operation.
moreWear resistance piston ring specially developed for the pneaumatic pump industrial application. It is easier to be installed comparing with the PTFE piston ring. Standard materials available are EPB13, EPB19 and so on.
more● Made of high anti-wear material EPB13;
● Maintenance-free, self lubricating;
● Chemical resistant;
● Dust resistant and quit running;
Self-lubricating, maintenance-free Low driving force Resistant to dust...
more