CRP Filament-wound bearings - CSB® Plastic Bearing Technology

Product properties

● Maintenance-free, dry operation
● Static load 240MPa,dynamic load 30MPa
● Working temperature -196/+160℃
● Resistant to dirt and dust
● Chemical resistance
● Internal bore can be precision-finished

General properties	Standard	Unit	CRP
Density	ISO1183	g/cm³	1.90
Max. water absorption	ISO62	%	0.1
Max. PV value	ITS026	N/mm²×m/s	1.0
Coefficient of friction	ITS025	µ	0.03-0.12
Long-term application temperature	ITS029	℃	+160
Short-term application temperature	ITS029	℃	+180
Lowest application temperature	ITS029	℃	-196
Max. Speed	ITS032	m/s	0.50
Compressive strength	ITS033	MPa	420
Max. static load	ITS027	MPa	240
Max. dynamic load	ITS028	MPa	30
Coefficient of thermal expansion	ISO11359	10^-6×K^-1	13
Color	-	-	White

Standard products

Thickness=2.5mm

Thickness=5.0mm

CRP Filament-wound bearings

Part no.:

d [mm]：

d-max. [mm]：

d-min. [mm]：

D [mm]：

d-max. [mm]：

d-min. [mm]：

L [mm]：

L-max. [mm]：

L-min. [mm]：

Max. shaft [mm]：

Min. shaft [mm]：

Max. housing [mm]：

Min. housing [mm]：

*Lead time [wks]：

Shop now

Dimensions

▊Material structure

Sliding layer：Fibers and PTFE compound tape as internally lubricating layer.

Backing：Continuous wound glass fiber encapsulated in a high temperature epoxy resin.

▊Typical features

Low friction coefficient

High motion speed

Suitable for linear motion

Internal bore can be precision-finished

Oil allowed

▊CSB-FWB® installation method

FWB纤维缠绕轴承安装方式

CSB-FWB®CRP Filament-wound bearings

Type PDF

Size 199KB

Time 03-2020

No. CSB/CAT.052

download

2880

▊Typical applications

Ball and butterfly trunnion bearing

Air pump guide bushes

Tie-bar guide bearing

Hydraulic pressure machinery

纤维缠绕轴承查询器 — CSB-FWB®

DURARUB® Filament Wound Bearings Finder V2.1

view tools

▊DURARUB® Filament Wound Bearings Finder[V2.0] is based on the analysis and calculation of a large number of test data in CSB® laboratory. You can calculations material data by entering parameters such as bearing load, speed, and temperature, and finally output material adaptation data.
▊Because the system calculate and analyze based on lab data, it can't exactly meet the ractual use requirements absolutly. The system data verification has certain limitations; CSB® recommends that the bearing must be tested again to verify whether it meets the actual use requirements.
▊DURARUB® Filament Wound Bearings Finder output data information is only for design reference, and can not be used as the final standard for determining the bearing material conformity, If you have any questions, please contact CSB® sales engineers.

▊CSB-FWB®filament-wound bearings are suitable for high-load applications, these bearings can meet most of the possible chemical medium; Filament-wound bearings are developed for dry friction and high-load movement, but it is also available used in oil lubrication, grease lubrication or water environment; CSB recommends that the bearing be used in immersed water or oil, CRW and CRF bearings are very suitable.
▊Find the resistance information from the right...

▊ CSB® Bearing Material Chemical Resistance

Please select bearing material and medium...

▊CSB® bearing material chemical resistance data is a comparison test result of the CSB chemistry laboratory using laboratory specimens or similar chemicals at room temperature 23 ℃, without considering the impact of other temperatures and chemical medium mixtures on the chemical resistance of CSB® bearing materials ; Therefore, this data can only act as a reference. CSB® recommends that the chemical resistance of actual parts should be tested under application conditions and verify the suitability of the bearings.

+86-400-6633-096

Online Tools

Product News

Customer Services

CSB® More products

CRM Filament-wound bearings

● Maintenance-free, dry operation
● Static load 240MPa,dynamic load 120MPa
● Working temperature -196/+160℃
● Resistant to dirt and dust
● Internal bore can be precision-finished

CRB Filament-wound bearings

● Maintenance-free, dry operation
● Static load 240MPa,dynamic load 140MPa
● Working temperature -196/+160℃
● Resistant to dirt and dust

CRG Filament-wound bearings

● Maintenance-free, dry operation
● Static load 240MPa,dynamic load 160MPa
● Working temperature -196/+160℃
● Resistant to dirt and dust

CRW Filament-wound bearings

● Excellent anti-wear property under water
● Max. static load 240MPa
● Operation temperature -196/+160℃
● Excellent dirty resistance
● Very lowest friction coefficient

CRF Filament-wound bearings

● Maintenance-free, dry operation
● Static load 150MPa,dynamic load 75MPa
● Working temperature -40/+130℃
● Excellent anti-wear ability in liquid lubrication
● All dimensions can be precision-finished