CSB塑料轴承产品
banner
banner
banner
CSB塑料轴承产品05
CSB塑料轴承产品04
EPB13 Self-lubricating plastic rods

Product properties

● Continuous working temperature: -50/+90℃

● Maintenance-free dry operation

● Small wear off amount against various shaft materials 

● Lower friction

● Suitable for soft shaft

● Low water absorption


Material properties 

Standard

Unit

CSB-EPB13

General properties

Color

-

-

Yellow

Density 

ISO1183

g/cm3

1.48

Max. moisture absorption, 50%RH

ISO62

%

0.3

Max. water absorption

ISO62

%

1.3

Coefficient of sliding friction(steel)

ITS025

µ

0.05-0.15

Max. PV value

ITS026

N/mm2×m/s

0.40

Mechanical properties

Flexural modulus

ISO178

MPa

2600

Flexural strength

ISO178

MPa

60

Max. static load

ITS027

MPa

35

Max. dynamic load

ITS028

MPa

14

Shore hardness

ISO868

D

74

Physical and thermal properties

Long-term application temperature

ITS029

+90

Short-term application temperature 

ITS029

+120

Lowest application temperature

ITS029

-50

Thermal conductivity

ISO22007

W/m/K

0.25

Coefficient of thermal expansion 

ISO11359

K-1×10-5

10

Flammability

UL94

Class

HB

Electrical properties 

Volume resistance

IEC60093

Ω·cm

>1013

Surface resistance 

IEC60093

Ω

>1012

*ITS:CSB company's internal test standards.  

**Test temperatures are 23℃ unless otherwise stated.

EPB13 Self-lubricating plastic rods
Dimensions

CSB-SFP® Semi-finished Products Finder[V2.0] is based on the analysis and calculation of a large number of test data in CSB® laboratory. You can calculations material data by entering parameters such as bearing load, speed, and temperature, and finally output material adaptation data.
Because the system calculate and analyze based on lab data, it can't exactly meet the ractual use requirements absolutly. The system data verification has certain limitations; CSB® recommends that the products must be tested again to verify whether it meets the actual use requirements.
CSB-SFP® Semi-finished Products Finder output data information is only for design reference, and can not be used as the final standard for determining the bearing material conformity, If you have any questions, please contact CSB® sales engineers.

CSB-SFP® Semi-finished Products

Type PDF
Size 301KB
Time 07-2022
No. CSB/CAT.062E
download

3498

MediumEPB13 bearings resistance
AlcoholResistant
HydrocarbonsResistant
Greases. oilsResistant
FuelsResistant
Diluted acidsConditionally resistant
Strong acidsNot resistant
Diluted alkalisResistant
Strong alkalisConditionally resistant
CSB® Bearing Material Chemical Resistance

Please select bearing material and medium...

CSB® bearing material chemical resistance data is a comparison test result of the CSB chemistry laboratory using laboratory specimens or similar chemicals at room temperature 23 ℃, without considering the impact of other temperatures and chemical medium mixtures on the chemical resistance of CSB® bearing materials ; Therefore, this data can only act as a reference. CSB® recommends that the chemical resistance of actual parts should be tested under application conditions and verify the suitability of the bearings.

+86-400-6633-096

Product News

Customer Services

Fast Services

CSB® More products
M80 Self-lubricating plastic rods
M80 Self-lubricating plastic rods

● Continuous working temperature: -40/+90℃

● Maintenance-free, self-lubricated

● Suitable for most application

● Suitable for medium and high load operation 

more
M81 Self-lubricating plastic rods
M81 Self-lubricating plastic rods

● Continuous working temperature: -100/+80℃

● Maintenance-free, self-lubricated

● Low friction, anti-wear

● Impact resistance, low noise

more
EPB Self-lubricating plastic rods
EPB Self-lubricating plastic rods

● Continuous working temperature: -40/+80℃

● Maintenance-free, self-lubricated

● Special lubricant and wear resistant

● Low friction coefficient

more
EPB5A Self-lubricating plastic rods
EPB5A Self-lubricating plastic rods

● Continuous working temperature: -100/+250℃

● Suitable for high load and lovo speed operation 

● High load capacity at higher temperature 

● Good chemical resistance

more
EPB6 Self-lubricating plastic rods
EPB6 Self-lubricating plastic rods

● Continuous working temperature: -40/+80℃

● Maintenance-free, self-lubricated

● Low friction coefficient

● FDA grade

more
EPB10 Self-lubricating plastic rods
EPB10 Self-lubricating plastic rods

● Continuous working temperature: -100/+250℃

● Maintenance-free, self-lubricated

● Good wear resistance with long service life 

● Good chemical resistance

more
MN70 Self-lubricating plastic rods
MN70 Self-lubricating plastic rods

● Continuous working temperature: -40/+90℃

● Maintenance-free, self-lubricated

● Low friction coefficient

● Long service time

more
MN71 Self-lubricating plastic rods
MN71 Self-lubricating plastic rods

● Continuous working temperature: -40/+110℃

● Maintenance-free, self-lubricated

● Suitable for operation in dusty environment 

● Suitable for working in humid environment

more
MN73 Self-lubricating plastic rods
MN73 Self-lubricating plastic rods

● Continuous working temperature: -40/+110℃

● Maintenance-free dry operation

● Low friction coefficient

● Suitable for working in humid environment

more
M80 Self-lubricating plastic plates
M80 Self-lubricating plastic plates

● Continuous working temperature: -40/+90℃

● Maintenance-free, self-lubricated

● Suitable for most application

● Suitable for medium and high load operation 

more
M81 Self-lubricating plastic plates
M81 Self-lubricating plastic plates

● Continuous working temperature: -100/+80℃

● Maintenance-free, self-lubricated

● Low friction, anti-wear

● Impact resistance, low noise

more
EPB13 Self-lubricating plastic plates
EPB13 Self-lubricating plastic plates

● Continuous working temperature: -50/+90℃

● Maintenance-free dry operation

● Small wear off amount against various shaft materials 

● Lower friction

more
MN71 Self-lubricating plastic plates
MN71 Self-lubricating plastic plates

● Continuous working temperature: -40/+110℃

● Maintenance-free, self-lubricated

● Suitable for operation in dusty environment 

● Suitable for working in humid environment

more
MN73 Self-lubricating plastic plates
MN73 Self-lubricating plastic plates

● Continuous working temperature: -40/+110℃

● Maintenance-free dry operation

● Low friction coefficient

● Suitable for working in humid environment

more
TRIBOTAPE® 11 Anti-wear tapes
TRIBOTAPE® 11 Anti-wear tapes

● FDA grade

● Low coefficients of friction

● Available underwater

● Continuous working temperature: -20/+80℃

more