● For dry, oil, grease or underwater applications
● Fluorine and silicon free
● Excellent dimensional stability
● High load capability
● Good chemical resistance
● Sliding layer machined available
● Continuous working temperature: -100/+250℃
Material properties | Standard | Unit | DURARUB®50 |
Density | ISO1183 | g/cm3 | 1.56 |
Max. PV (dry) | ITS026 | N/mm2×m/s | 1.5 |
Coefficient of friction | ITS025 | µ | 0.10-0.25 |
Application temperature | ITS029 | ℃ | -100/+250 |
Max. Speed | ITS032 | m/s | 0.20 |
Max. static load | ITS027 | MPa | 600 |
Max. dynamic load | ITS028 | MPa | 110 |
Coefficient of thermal expansion | ISO11359 | 10-6×K-1 | 13 |
Shore hardness | ISO868 | D | 95 |
Shaft hardness | - | HB | ≥400 |
Shaft surface finish | - | Ra | 0.2-0.6 |
DR50 sliding plates consists only of a sliding layer, combining the excellent load performance and high strength of a low-friction sliding layer.
The sliding layer consists of a special carbon fiber fabric filled with PEEK resin, designed to ensure good mechanical and tribological properties.
386
● Maintenance-free, dry operation
● Static load 240MPa,dynamic load 120MPa
● Working temperature -100/+160℃
● Resistant to dirt and dust
● Maintenance-free, dry operation
● Static load 240MPa,dynamic load 160MPa
● Working temperature -100/+160℃
● Resistant to dirt and dust
● Excellent anti-wear property under water
● Max. static load 240MPa
● Operation temperature -100/+100℃
● Excellent dirty resistance
● Very lowest friction coefficient
● Maintenance-free, dry operation
● Static load 240MPa,dynamic load 30MPa
● Working temperature -100/+160℃
● Resistant to dirt and dust
● Maintenance-free, dry operation
● Static load 150MPa,dynamic load 45MPa
● Working temperature -40/+130℃
● Excellent anti-wear ability in liquid lubrication