● Maintenance-free, dry operation
● Static load 240MPa,dynamic load 120MPa
● Working temperature -100/+160℃
● Resistant to dirt and dust
● Chemical resistance
General properties | Standard | Unit | CRM |
Density | ISO1183 | g/cm3 | 1.95 |
Max. water absorption | ISO62 | % | 0.1 |
Max. PV value | ITS026 | N/mm2×m/s | 1.8 |
Coefficient of friction | ITS025 | µ | 0.05-0.15 |
Long-term application temperature | ITS029 | ℃ | +160 |
Short-term application temperature | ITS029 | ℃ | +180 |
Lowest application temperature | ITS029 | ℃ | -100 |
Max. Speed | ITS032 | m/s | 0.20 |
Compressive strength | ITS033 | MPa | 420 |
Max. static load | ITS027 | MPa | 240 |
Max. dynamic load | ITS028 | MPa | 120 |
Shore hardness | ISO868 | D | 95 |
Coefficient of thermal expansion | ISO11359 | 10-6×K-1 | 13 |
Color | - | - | Blue |
Sliding layer: Continuous wound PTFE and high-strength fibers encapsulated in an internally lubricated, high temperature filled epoxy resin.
Backing: Continuous wound glass fiber encapsulated in a high temperature epoxy resin.
Very good friction and wear properties High load capacity Excellent contamination resistance Good chemical resistance |
2492
Boom lifts, Scissor lifts
Hydraulic cylinder pivots
Handling machinery
Packager machinery
▊CSB-FWB® Filament Wound Bearings Finder[V2.0] is based on the analysis and calculation of a large number of test data in CSB® laboratory. You can calculations material data by entering parameters such as bearing load, speed, and temperature, and finally output material adaptation data.
▊Because the system calculate and analyze based on lab data, it can't exactly meet the ractual use requirements absolutly. The system data verification has certain limitations; CSB® recommends that the bearing must be tested again to verify whether it meets the actual use requirements.
▊CSB-FWB® Filament Wound Bearings Finder output data information is only for design reference, and can not be used as the final standard for determining the bearing material conformity, If you have any questions, please contact CSB® sales engineers.
▊CSB-FWB®filament-wound bearings are suitable for high-load applications, these bearings can meet most of the possible chemical medium; Filament-wound bearings are developed for dry friction and high-load movement, but it is also available used in oil lubrication, grease lubrication or water environment; CSB recommends that the bearing be used in immersed water or oil, CRW and CRF bearings are very suitable.
▊Find the resistance information from the right...
Please select bearing material and medium...
▊CSB® bearing material chemical resistance data is a comparison test result of the CSB chemistry laboratory using laboratory specimens or similar chemicals at room temperature 23 ℃, without considering the impact of other temperatures and chemical medium mixtures on the chemical resistance of CSB® bearing materials ; Therefore, this data can only act as a reference. CSB® recommends that the chemical resistance of actual parts should be tested under application conditions and verify the suitability of the bearings.
● Maintenance-free, dry operation
● Static load 240MPa,dynamic load 140MPa
● Working temperature -100/+160℃
● Resistant to dirt and dust
● Maintenance-free, dry operation
● Static load 240MPa,dynamic load 160MPa
● Working temperature -100/+160℃
● Resistant to dirt and dust
● Excellent anti-wear property under water
● Max. static load 240MPa
● Operation temperature -100/+100℃
● Excellent dirty resistance
● Very lowest friction coefficient
● Maintenance-free, dry operation
● Static load 240MPa,dynamic load 30MPa
● Working temperature -100/+160℃
● Resistant to dirt and dust
● Maintenance-free, dry operation
● Static load 150MPa,dynamic load 45MPa
● Working temperature -40/+130℃
● Excellent anti-wear ability in liquid lubrication