CSB Releases LMS04 Miniature Electric Linear Module: Ultra-Thin Form Factor Empowers Precision Miniature Automation CSB has officially launched the LMS04 miniature electric linear module. Boasting an ultra-compact miniaturized design, it overcomes precision motion control challenges in confined spaces and provides high-performance domestic transmission solutions for high-end automation industries such as 3C electronics, medical equipment, semiconductor inspection and laboratory instruments. The module features an overall height as low as 29 mm and a minimum overall length of only 120 mm. Its ultra-thin integrated structure significantly saves installation space and enables miniaturization and lightweight upgrades for automated equipment. Adopting advanced self-lubricating sliding construction, the product enables long-term maintenance-free operation without regular grease refills. It eliminates grease contamination risks and fits clean working conditions, reducing equipment maintenance labor and costs. In addition, the LMS04 runs smoothly and stably with ultra-low noise, suitable for various silent precision working environments. It supports customizable strokes and high-performance lead screw drive systems, which can be flexibly adapted for customers’ non-standard working conditions. Compared with conventional imported miniature linear modules, this product offers stable lead times and better cost performance. It can fully replace imported alternatives, helping downstream enterprises optimize supply chains and lower production costs to fuel high-quality development of China’s precision automation equipment sector.

Recently, CSB, a company focusing on the R&D of core PV supporting components, officially launched the solar bracket plastic spherical plain bearing GSQB-120-075-EC...

The medium-sized cable chains C02.18 and C02.25 now feature upgraded mounting brackets and cable tiewwrap plates, providing greater robustness and stability compared to the previous design with separate Mounting brackets and cable tie elements.

CSB® Plastic Bearing Technologies Co., Ltd. is launching new products in Q2 2025 to meet the demands of various industries, providing customers with greater reliability and faster service...

Recently, CSB launched DURAMOV® C06 low-noise and high-speed cable drag chain. The inner height of this drag chain ranges from 29 to 52mm, the inner width ranges from 40 to 150mm, and the turning radius ranges from 55 to 250mm. It is suitable for most industrial automation cable protection requirements. It adopts a special structural design and has the advantage of long life. Its arc shape design and the way short-pitch chain links are connected to elastic elements effectively reduce bending vibration and perfectly meet the needs of low-noise, high-speed and clean room applications.

CSB® has released version V1.0 of the FLEXMOV® high-flexible cable finder. This system is based on a large amount of test data from CSB® laboratories and combined analysis and calculation of cable materials and structural characteristics. You can select sheath materials, cable application parameters and applications. The environment option....

High-performance wear-resistant materials serve as sliding layers combined with high-strength fiber-reinforced load-bearing layers; DURARUB® materials are suitable for applications with consistently high static and dynamic loads...

Continuous working temperature: -20/+120℃；Low coefficients of friction；Available underwater；Easy to cut；Standard thickness 0.50mm；Individual widths from 20 to 300 mm；Available tapes without adhesive back...

CSB® to meet the needs of various industries, launched four new linear guide rails, to provide you with more reliable and faster service...

CSB® has launched the ALBP High-precision sliding bearings . Sliding layer materials TEFPLAS® P FDA food contact safety materials, suitable for soft shafts. The standard bearing back material is light-weight and high-strength aluminum alloy. When the bearing is used in applications with high requirements for corrosion resistance, it is recommended to use stainless steel back;

C31 micro cable chains are openable along the outer radius or inner radius, strong and multi-opening method design, Suitable for highly dynamic applications and cables filled quickly, optimal for the smallest installation spaces, and are available in many versions.

CSB® ​has launched the WRU02 round rail hybrid blocks . The WRU02 series is standard rolling and sliding hybrid blocks， smooth moving and driving force reduced 45%， resistant dust and quiet operation， various installation options are available.

CSB® has launched the latest 316Ti stainless steel linear guides（single round rail / double round rail） and sliding block. It has good corrosion resistance, resistance to dirt with LIN liners, self-lubrication, maintenance free, resistance dust and no noise.

CSB-LIN®P precision linear bearings have the same dimensional accuracy as metal ball linear bearings, but with higher load carrying capacity and extremely low operating noise. The liners are made of TEFPLAS® compounds developed for maintenance-free and low friction coefficient, LINP linear bearings suitable for ± 200 ℃ operation temperature; LINP small gap operation with TEFPLAS® materials will not damage to the shaft and can clean the surface dirt.

EPB13 material has been widely used in automation equipment, pharmaceutical machinery, food packaging and beverage filling industries as high wear-resistant plastic linear bearings, plastic bearings and other bearing products; at the same time, as a wear-resistant plastic sheet, it can be used for processing and is not suitable for injection molding Process thick-walled parts, wear-resistant sliding plates, wear-resistant plastic nuts and other industrial parts.

CSB-LIN®Q square linear guide system ensures linear, torqueresistant motion are ideally suited for the unsupported applications. Due to the hollow design of the surface hard anodized aluminum alloy square rail, the cables can be inserted ...

The inner and outer races and cages of CSB-PRB® plastic ball bearings are made of high-performance plastics, and the ball materials can be selected from stainless steel, glass, ceramics, etc.; PRB plastic rolling bearings have good self-lubricating performance and corrosion resistance; Plastic ball bearings have higher operating speeds than CSB-EPB® plastic plain bearings, CSB-PRB® plastic ball bearings require small driving force and are suitable for use as follower bearings. The flange ball bearings and the ball bearing blocks further expand the use characteristics of the plastic ball bearings, and ensure the requirements of low friction coefficient and small driving force, realize the automatic centering function, and solve the problem of the installation center error of the plastic ball bearings. In 2022, CSB® upgraded the optimized combination of plastic ball bearings, which further expanded the applicability of PRB plastic ball bearings. CSB® also design non-standard customized bearing products for customer.

In some applications, in addition to maintenance-free and clean requirements, linear motion guides also require a small drive force. Traditional sliding maintenance-free linear guides cannot achieve lower drive force due to material technical limitations. CSB® currently introduces maintenance-free roller guides. The rollers made of wear-resistant composite materials with rolling bearings inside, and the driving force is about 10% of sliding carriages; the guide rail and the mounting plate of the rolling carriages are made of light aluminum alloy; The rolling carriages with the gap compensation adjustment device, which can realize almost zero gap operation. Installation threaded holes are consistent with the standard ball sliders. Very suitable for high speed applications, the speed up to 10m/s; the maximum operating temperature up to 120℃; , CSB® can design more roller slides upon request.